HEAT PUMP SERVICE PROVIDE IN UAE | VIESSMANN
The heat pump systems use the refrigerator cycle to dissipate heat from the surrounding air. Then they use a heat exchanger to heat the water in a closed cylinder.These systems work in the same way to slow down the air conditioner cycle when driven by the heating cycle, but heat the water instead of the air inside your home.
The hot water heat pump system can be considered as a type of solar water heater because the heat in the air eventually comes from the sun. Unlike solar hot water systems, heat pumpsystems do not have electricity or a gas boost system. But they use electricity to use an evaporator fan and a compressor when heating water. These systems typically use about 60 to 75% less electricity than a conventional hot water system. This is because electricity is used to operate a heat pump and does not heat water directly with something.
Heat pump heaters are usually installed outside on the floor. In some cases it can be installed internally. This can be an advantage compared to a solar water heater, as the collection panels do not require installation on the roof, which makes installation easier. It is important that they are kept in a well-ventilated area, as they need access to cool air when operating.
Like air conditioners, water pump heaters have a fan and a compressor that will make noise when the unit is working to heat the water. This needs to be considered if they are installed. Ideally, they should be kept away from bedroom windows, and be in a quiet place for your neighbors. Ask your supplier about the decibel level of the unit when you receive the quotation. Also ask about the installation options that will reduce any audio problems.
The heat pump operates as follows:
1-The heat source, which may be airless or a mixture of water contained within the earth's crust, is either blown or pumped into the heat exchanger of the outer part of the heat pump.
2 -This heat (although cold compared to the indoor air) is warm enough to cause the special liquid of the refrigerator to evaporate and turn into gas.
3-This gas is then fed to a compressor that raises the gas pressure, which in turn causes the temperature to rise. For example you may have noticed that the bicycle pump, heated when used, the heat pump gases meet the same temperature rise due to pressure.
4-The gas (now hot) is transferred to the interior of the heat exchange. This heat can be blown into the atmosphere or transferred to a central heating system or to a hot water system.
5-The gas decreases with temperature as heat is transferred to the home and then returns to the liquid state.
6-The refrigerator returns to the outside of the heat exchange and the process repeats itself until it has passed enough heat in the house.
Speaking of technology, the heat pump is a refrigeration system for a recyclable compression cycle. Fortunately, its functionality is not as complicated as it sounds. The heat pump simply transfers heat from one place to another to help you maintain the desired temperature in your home.
In cooling mode, the heat pump is similar to an air conditioner. It absorbs heat inside the house and drains it out. The cooler then returns home to bring cool air that will keep you comfortable in warm weather.
In the heating mode, the heat pump absorbs heat from the outside air and absorbs it. This is different from a furnace, which produces its own heat. The heat pump is not a heat source but a heat transfer vehicle.
Comments
Post a Comment