The Best Air source System -UAE - Viessmann

Ground-Source and Absorption Heat Pumps:

There are many types of heatpumps, but they all operate on the same basic principle: heat transfer. This means that instead of burning fuel to create heat, the device transfers heat from one place to another. There is a key to making all of this possible. According to thermodynamics, heat naturally flows from high temperatures to those with low temperatures.

What the heat pump does is use a small amount of energy to reverse the process, thus releasing heat at relatively low temperatures, and then pumping it at higher temperatures. Therefore, heat is transferred to a "heat source," such as a ground or air, "to a heat sink," as your home.

One of the most common types of heat pumps is an air source heat pump. These absorb heat from the air outside your home and pump it in through coil-filled coolers, which can be very different from what is behind your refrigerator. The air conditioner variant is a good base, and you will find two fans, refrigerator coils, a rectifier valve and a compressor inside for operation.

The key to allowing the air pump heat pump to cool down is also a receding valve. This variable component alters the flow of the refrigerator so that the system operates in reverse. So instead of pumping heat inside your home, a heat pump releases it, just as your cooling system does. When the refrigerator is turned back, it absorbs heat to the inner side of the unit and flows out. This is where the heat is released, which allows the refrigerator to cool again and flow back inside to retain more heat. This process repeats itself until you are beautiful and cool.

HEAT PUMPFAQs :

How does a winter heat pump work?

The heat pump absorbs heat from the outside air and pumps it inside to keep your home warm. They are less expensive to use than a gas stove because they use less electricity.

Is the heat pump cooling and the air conditioner?

Heat pumps can be hot AND cool air unlike coolers. Even when it comes to cooling your house on the floor, heat pumps work much better compared to A / Cs.

What is the temperature when the heat pump is not working properly?

Although heat pumps work much better than A / C in general, they cannot maintain their efficiency between 25 and 40 degrees Fahrenheit. Temperature pumps are best at temperatures above 40 degrees. Anything down and they start using a lot of energy, which makes the furnaces work better at that moment.

How do you reset your heat pump?

To reset your heat pump, turn off the thermostat and pump first. Turn off any related breakers and let the refrigerator sit for at least three to five minutes. You can clean filters or pipes while you wait. Then, turn on the system again in sequence.