Providing the best solar collector system- UAE - Viessmann

Using the solar collector a new concept. Today, solar thermal systems are located on the roof of houses around the world, providing access to hot water that is inaccessible, not polluting millions of people. In many US homes, water is heated using electricity, natural gas, or oil. Since most of our electricity is generated from fossil fuels, it is safe to say that much of the water in the United States is heated using fossil fuels. The burning of fossil fuels releases pollution and is believed to contribute to global climate change.

Since it takes a huge amount of energy to heat water, it can be an important part of our energy bills. Replacing a conventional water heater with a water heater using solar energy is not only bad for the environment; it can also be a great way to save money on your energy bill. Solar collectors take advantage of the greenhouse effect to heat the water. Have you ever noticed how awesome it is inside a car parked in the sun? Sunlight passes easily through glass windows and turns into heat when it hits the interior of a car. Some of that heat passes back into the glass, but much of it gets trapped inside. In the solar system, this trapped heat heats the water around the system.

Why are Solar Collectors Important?

Collectors are the beginning of the transformation of sunlight into energy. They must be designed to effectively absorb light while minimizing construction, installation, and operating costs. Collectors who can effectively benefit from high levels of sunlight are able to directly improve the efficiency of the receiver. Currently, collectors can add 25 percent or more of the cost to the CSP crop system. The UAE Department of Energy (SETO) is working to reduce collector costs, with a target of $ 50 per square meter for private heliostats, to achieve its target of $ 0.05 per kilowatt-hour of CSP load loads -12. hours of hot energy storage.

Start by Switching to Green Power | Solar collector –

An easy way to switch to green power is to call your current provider and see if they offer another option. A growing number of companies are doing just that, using renewable energy sources such as wind and solar energy to provide electricity for their markets. This is more expensive for the consumer, as you will have to pay a fee to reduce the costs involved in touching another source, but the price varies: in Sacramento, you will pay 5 cents per kilowatt hour or $ 30 a month, and in Oregon you will only pay cents .8 per kilowatt hour per wind, geothermal, or hydropower hour. 

The collected solar panel contains thousands of micro-perforations that allow the thermal boundary layer to be trapped and evenly distributed in the air space behind the outer panels. This hot air is pumped under negative pressure to the building's air intake system where it is then distributed in conventional ways or using a solar-powered air-conditioning system.

Hot air can enter the HVAC system connected to a temporary collector with air vents located at the top of the collector, especially if the collector is facing west. To address this issue, Matrix Energy is patented by a previous collector in an area with a low ventilation and a perforated frame to further the increased air flow behind the perforated connector to maximize efficiency.

This cut-out view shows parts of the solar collection past Matrix Air and air flow. Low air intake reduces the penetration of hot air into the HVAC system during summer operation.