Top Refrigeration service provider in – UAE – Viessmann

Refrigeration can be defined as the process of extracting heat from an object and pumping it around. It includes the process of storing and lowering body temperature below normal ambient temperature. Refrigeration is a system of removing heat energy from an unwanted location and disposing of it in an unwanted location to an unsuitable location. The refrigerator is weighed in tons.The refrigerator is divided into four broad areas based on the temperature of the evaporator coil.

Our experts work in:

HIGH TEMPERATURE is used to store the product over ice. Usually the temperature is below 40 ° F and above 32 ° F

MEDIUM TEMPERATURE is used to store frozen foods and to store fresh foods. One example is a home refrigerator room. Temperatures above 0 ° F and below 32 ° F.

LOW TEMPERATURE is used to quickly stop and store food. Temperatures are below 0 ° F.

Our specialists work in the following sales machines:

Frozen food storage areas.

Access cabinets (refrigerators and freezers).

Go with refrigerators (refrigerators and freezers).

Stores of stores.

Ice units.

Cube ice machine.

Ice Equipment.

Supermarket goods.

Show cases.

Thick units are installed on the rack.

Same compressors.

Protocol systems (soda machines).

Liquid chillers packed.

The air is cool.

The water is cool.

Cooler for drinking water.

A measurement device is the point at which we will start the cycle cycle. This could be a temperature change valve, a capillary tube, or another refrigeration flow controller on an evaporator, or a coil, such as a low-temperature refrigerator, and a low-temperature refrigerator. The start refrigerator evaporates (changes position) as it passes through the evaporator, where it removes heat from the object or area where the evaporator is located I system.

The refrigeration system requires certain means of connecting key components - evaporator, compressor, condenser, and meter meter - just as the roads connect communities. Tubes or "lines" make the system perfect so that the refrigerator does not get into the atmosphere. Some systems will have a receiver immediately after the condenser and before the measuring device, where the refrigerator is stored until it is needed to remove heat from the evaporator.

There are many different types and variations of refrigeration cycle components. For example, there are at least a dozen different types of compressor, ranging from reciprocating, piston using screw, roll and centrifugal impeller design, but the function is the same in all cases - that of pressing high temperature vapor. -heat vapor.

The same can be said of the condenser and evaporator surface. They can be empty pipes, or they can be fitted with condensers and evaporators with electrically ventilated fans to transmit air through tem, or with a condenser pump for a water-cooled condenser. There are many different types of measuring machines to control the liquid refrigerator in the evaporator, depending on the size of the equipment, the refrigerator used, and its use.