The best air source heat pump - UAE – Viessmann
The heat pump lots of new
features that improve the performance of heat pumps. Unlike conventional
compressors that can only operate at full capacity, dual compressors allow heat
pumps to operate close to the required temperature or cooling capacity at any
external temperature, saving energy by reducing the opening / closing and aging
of the compressor. Double-speed heat pumps work well with space control
systems. Area control systems, commonly found in large houses, use automatic
dampers to allow the heat pump to store different rooms at different
temperatures.
Some models of heat pumps are
equipped with flexible or double-speed engines for their internal fans (air
vents), external fans, or both. The flexible speed controllers of these fans
try to keep the air moving at a relaxed speed, reduce downtime cooling and
increase energy efficiency. It also reduces the noise from the blower running
at high speed.
Some of the most efficient heat pumps are fitted with a desuperheater and a good cooling system, which returns the dirt to the cooling mode of the heat pump and uses it to heat water. A heat pump with a desuperheater can heat water 2 to 3 times more than a normal electric heater is a good system.
Another development is the technology of the scroll compressor heat pump, which consists of two spiral-shaped volumes. Heat pump Compared to conventional piston compressors, scroll compressors have a longer working life and are quieter. According to some reports, heat pumps with scrolling compressors provide a warm air temperature of 10 ° to 15 ° F (5.6 ° to 8.3 ° C) when the temperature is high and low, compared to existing heat pumps with piston compressors.
Although most heat pumps use heat-resistant electric heaters as a backup for cold weather, heat pumps can also be installed in conjunction with a gas furnace, sometimes called a dual or hybrid fuel system, to fill the heat pump. This helps solve the problem of slow-moving heat pumps at low temperatures and reduces their power consumption. There are very few heat pump manufacturers that combine both types of heaters in one box, so this system usually has two small systems, side to side, often sharing the same way.
Compared to a furnace heated by burning gasoline or a conventional heat pump alone, this type of system can be very economical. Real energy efficiency depends on the amount of fuel costs compared to electricity.
Benefits –
· It works much better than direct conversion of electrical energy into heat.
· Simultaneous production of heat and cold.
· It does not contain CO2 and does not emit, when energy from renewable energy sources is used.
· Low cost of life cycle heat: A long-term economic solution with low CAPEX and OPEX.
· Easy to integrate with existing processes and applications.
· Proven, reliable technology: Heat pumps are usually available and attached to houses, the size is already increased.
· Garbage heat can be reused and resold for other purposes, connected to different applications (to enable new business models).
· Powerful performance: Short ramp ratings.
· Strengthening power grid: High shaving to generate more power to balance supply and demand, residual energy from renewable sources can be converted into heat.
Heat pumps
cost –
· The heat pump will cost more than a central air conditioner and an electric heating system with equal cooling capacity. (But remember, electric heat is used only in very cold winter months.).
· But, like any other machine, there is a huge difference in the prices of a heat pump. (meaning non-commercial, for your home).
· To give you a wide range, heat pump systems, fully integrated with a qualified contractor, generate between $ 3,500 for small budget systems and up to $ 13,000 for one of the most efficient heat pump systems in large houses.
· Most installations will fall between those two extreme conditions.
Comments
Post a Comment